Hyundai Hydraulic Pump Dealer and Supplier in Bihar

Hydraulic excavators operating on construction sites, road projects, industrial developments, mining activities and earthmoving contracts require a correctly matched hydraulic pump for consistent performance. Symptoms such as slow boom operation, reduced digging power, weak travel, delayed response or poor performance during simultaneous functions can indicate a hydraulic-system issue that needs professional inspection.

Multitech Motion supports Hyundai hydraulic pump requirements in Bihar for contractors, excavator owners, equipment workshops, infrastructure companies and hydraulic service providers. Buyers can enquire about complete hydraulic pumps, replacement assemblies, pump components and identification assistance by sharing the excavator model, serial number and original pump details.

Hyundai Hydraulic Pump Dealer and Supplier in Bihar

A buyer searching for a Hyundai Hydraulic Pump Dealer and Supplier in Bihar is generally looking for a suitable replacement pump, complete hydraulic assembly or reliable sourcing assistance for a Hyundai excavator. Multitech Motion focuses on matching the replacement requirement with the actual machine and original pump configuration.

Customers in Patna and Gaya can provide the hydraulic pump nameplate, excavator identification plate and available OEM number. These details can help establish displacement, pump family, regulator configuration and mounting requirements before procurement.

Hyundai Hydraulic Pump Supplier for Excavators

Hyundai excavators use hydraulic power for boom, arm, bucket, swing and travel operations. Different generations can have different pump arrangements, even when excavators have similar operating capacities. A visually similar pump is therefore not necessarily a compatible replacement.

For equipment owners in Muzaffarpur and Bhagalpur, Multitech Motion can assist with pump identification based on the existing hydraulic pump, machine model and available identification numbers. This approach helps buyers avoid selecting a pump solely from an approximate excavator tonnage.

Hyundai Hydraulic Pump Model Numbers

Hyundai excavator applications can involve Kawasaki K3V and K5V pump families and their different configurations. Important model references include:

• K3V63

• K3V63DT

• K3V63DTP

• K3V80

• K3V80DT

• K3V80DTP

• K3V112

• K3V112DT

• K3V112DTP

• K3V112DP

• K3V140

• K3V140DT

• K3V140DTP

• K3V180

• K3V180DT

• K3V180DTH

• K3V180DTP

• K3V280

• K3V280DTP

• K3V280DTH

• K5V80

• K5V80DT

• K5V80DTP

• K5V140

• K5V140DT

• K5V140DTP

• K5V140DTH

• K5V160

• K5V160DT

• K5V160DTP

• K5V160DTH

• K5V200

• K5V200DT

• K5V200DTP

• K5V200DTH

• K5V212

• K5V212DPH

These model references cover pump families and configurations encountered in Hyundai applications. The precise pump must be verified against the machine's original specification, displacement, control arrangement and mounting.

Hyundai R140, R160 and R180 Hydraulic Pump Applications

Hyundai R140, R160 and R180 excavators are used for trenching, excavation, foundation work, site preparation and general construction. Their hydraulic pump requirements can differ according to the machine generation and configuration.

Equipment owners in Darbhanga and Purnia can enquire about replacement pumps by providing the complete excavator model and photographs of the original hydraulic pump. A pump nameplate is particularly helpful when the machine documentation is unavailable.

Hyundai R210 Hydraulic Pump Dealer in Bihar

The R210 family is widely used for medium-duty excavation and construction work. Different R210 variants can have different hydraulic configurations, making the complete model designation and pump identification important when sourcing a replacement.

For contractors operating around Bihar Sharif and Ara, Multitech Motion can assist with R210 hydraulic pump enquiries after reviewing the machine serial number, pump nameplate and available OEM reference.

Hyundai R210 Hydraulic Pump Models and References

Common hydraulic pump references encountered in R210 applications include:

• K3V112

• K3V112DT

• K3V112DP

• 31N6-10051

• 31N6-17010

• 31Q6-10010

These references should not be treated as universal R210 fitments. The correct variant depends on the exact machine generation and hydraulic configuration.

Hyundai R220, R235 and R250 Hydraulic Pumps

R220, R235 and R250 Hyundai excavators are used for road construction, infrastructure projects, commercial excavation and heavier earthmoving. Their pumps need to deliver the correct hydraulic flow for continuous boom, arm, bucket and travel operation.

Customers in Begusarai and Katihar can enquire about complete hydraulic pumps, replacement units or pump components by providing the original pump information and excavator identification.

Hyundai R260, R290 and R300 Hydraulic Pump Supplier

Larger R-series Hyundai excavators are frequently used for quarrying, major excavation, road development and infrastructure work. Models such as R260, R290 and R300 require careful hydraulic pump matching because displacement and control specifications can vary.

For equipment operating in Chapra and Hajipur, Multitech Motion can assist with pump enquiries based on the machine model, serial number and original pump plate. Selecting a replacement from appearance alone can result in an incorrect configuration.

Hyundai R320, R360 and R380 Hydraulic Pumps

R320, R360 and R380 excavators represent higher-capacity equipment designed for demanding excavation and material-handling work. K3V180-family pumps are associated with selected large Hyundai excavator applications.

Customers in Sasaram and Buxar can provide the existing pump identification when seeking a replacement hydraulic pump. The pump's displacement, regulator and mounting configuration should be checked before the order is finalized.

Hyundai R430, R480 and R520 Hydraulic Pumps

Large Hyundai excavators such as R430, R480 and R520 are used for high-production earthmoving, quarrying, infrastructure and heavy excavation. Their hydraulic systems require pumps matched to the machine's specific operating requirements.

For customers in Motihari and Bettiah, Multitech Motion can assist with hydraulic pump identification from the machine plate and original pump details. High-capacity pumps should always be matched carefully because different machine generations can have different hydraulic configurations.

Hyundai HX-Series Hydraulic Pump Requirements

Hyundai's HX excavator family includes machines covering a broad range of construction and earthmoving applications. Common models encountered in hydraulic pump enquiries include:

• HX140L

• HX180L

• HX210L

• HX220L

• HX260L

• HX300L

• HX330L

• HX380AL

• HX430L

• HX480A

• HX520L

• HX800L

• HX900L

• HX1000L

Customers in Saharsa and Supaul looking for HX-series hydraulic pumps should provide the exact model designation and original pump details. The hydraulic configuration should be verified before selecting a replacement.

Hyundai HX Hydraulic Pump Applications

HX-series excavators are used for roadwork, industrial development, commercial construction, quarrying, infrastructure projects and heavy earthmoving. Pump requirements can vary between machine sizes and production generations.

For equipment owners in Nawada and Jehanabad, Multitech Motion can review the available machine and pump information before identifying a suitable replacement requirement. A clear photograph of the pump nameplate can significantly improve identification accuracy.

Hyundai Hydraulic Pump Repair and Replacement

Hydraulic pump failure does not always mean the entire pump assembly must be replaced. Depending on the condition, components such as the cylinder block, pistons, valve plate, bearings, shaft, seals and regulator may require inspection.

Customers in Aurangabad and Jamui can enquire about hydraulic pump replacement or component requirements. Hydraulic oil contamination, blocked filters, suction restrictions and other system conditions should also be investigated to prevent repeated pump problems.

How to Identify the Correct Hyundai Hydraulic Pump

Accurate pump identification is important because K3V and K5V families contain multiple displacement and control configurations.

Buyers should provide:

• Exact Hyundai excavator model

• Machine serial number

• Existing pump model

• Pump nameplate photograph

• OEM part number

• Pump displacement

• Number of pump sections

• Regulator or control details

• Shaft and mounting information

• Photographs of the complete pump

A clear nameplate photograph can be especially useful for older machines where original technical documentation is no longer available.

Hyundai Hydraulic Pump Applications for Bihar Equipment

Hyundai excavators operating across Bihar are used in road construction, drainage projects, commercial development, foundation excavation, industrial work, earthmoving and infrastructure expansion. These applications require hydraulic pumps capable of delivering dependable flow throughout demanding work cycles.

Contractors in Raxaul and Kishanganj can enquire about Hyundai hydraulic pump requirements according to their machine model and operating conditions. Multitech Motion can review the available pump identification before the replacement requirement is finalized.

Real-Based Hyundai Hydraulic Pump Buyer Story

A Bihar-based earthmoving contractor noticed that his Hyundai excavator was gradually losing working speed during a major site-development project. The operator reported that the machine could still dig, but boom recovery was slower and simultaneous boom-and-arm operation was taking longer than usual.

The contractor initially believed that purchasing a pump with the same excavator model would solve the problem. Before ordering, the existing hydraulic pump was photographed and the machine serial number was recorded. The pump identification was then compared with the machine configuration.

The hydraulic system was also considered because contaminated oil, restricted suction and poor filtration can contribute to pump performance problems. After the original pump configuration was confirmed, the replacement requirement was established.

The excavator was subsequently tested through normal operating cycles after installation. The case demonstrated why hydraulic-pump buyers should verify the machine model, serial number and original pump identification together instead of selecting a replacement purely from machine size.

Why Choose Multitech Motion for Hyundai Hydraulic Pumps?

Multitech Motion supports Hyundai excavator owners, contractors, construction companies, equipment workshops and hydraulic-service professionals with pump identification and sourcing requirements.

Typical requirements include:

• Complete Hyundai hydraulic pumps

• Kawasaki K3V pump assemblies

• Kawasaki K5V pump assemblies

• Replacement hydraulic pump units

• Rotating groups

• Valve plates

• Pistons and cylinder blocks

• Pump regulators

• Hydraulic pump components

• Replacement pump requirements

Providing the original pump plate and machine details helps make the identification process more efficient.

Hyundai Hydraulic Pump Dealer in Bihar – Multitech Motion

Multitech Motion supports Hyundai hydraulic pump enquiries for excavator owners, contractors, construction businesses, quarry operators and hydraulic workshops throughout Bihar.

Whether the requirement is for an older R-series Hyundai excavator, a newer HX-series machine or a Kawasaki K3V/K5V hydraulic pump configuration, the replacement should be selected according to the actual machine and original pump specification.

Frequently Asked Questions

Who is the Hyundai hydraulic pump dealer in Bihar?

Multitech Motion handles Hyundai hydraulic pump requirements in Bihar, including pump identification, replacement assemblies, components and sourcing support.

Which hydraulic pump is used in a Hyundai R210?

Selected Hyundai R210 applications use the K3V112 family. The exact variant should be confirmed using the machine serial number and original pump identification.

What pump is used in a Hyundai R290?

Selected Hyundai R290 applications are associated with K5V140-family pumps. The exact pump variant and OEM reference should be verified before ordering.

Can Multitech Motion identify a Hyundai pump from photographs?

Yes. Clear photographs of the pump nameplate, complete pump and excavator identification plate can help determine the appropriate hydraulic pump configuration.

Are K3V112 and K5V140 hydraulic pumps interchangeable?

No. They are different pump families with different displacement and configuration characteristics. Compatibility must be established from the machine's hydraulic specification.

Does Multitech Motion supply pumps for old Hyundai excavators?

Yes. Multitech Motion handles enquiries for replacement hydraulic pumps and related components for older Hyundai excavators, subject to identification and availability.